Intellitec battery isolator relay software#
Intellitec battery isolator relay Pc#

When the ignition switch is turned off, the relay will open immediately. Intellitec Bi Directional Battery Isolator Relay Delay (00-00839-000) 0 99.61 Intellitec Battery Isolator Relay Delay (00-00629-120) 0 89.73 Intellitec Isolator Delay Relay (00-00362-100) 0 102.42 Intellitec 100A Battery Disconnect Switch (01-00335-000) 0 111.92 Intellitec 100A Battery Latch Disconnect Switch 0 94.92 - 102. When this voltage goes above 13.3 Volts for approximately 12 seconds, as happens when the engine is running normally (normal alternator output voltage is approximately 14.4 Volts), it will close the isolator relay providing charging current to the auxiliary battery. It operates by sensing the voltage on the main 12 Volt system. There are three (3) wires to connect to the delay unit: one from an ignition switched 12 Volt source, a ground and the isolator relay coil. It operates in combination with a conventional continuous duty cycle isolator relay that has been used by a number of vehicle manufacturers. The unit is fully encapsulated in a plastic enclosure for mounting in the engine compartment with two screws.

The unit is available in both 12 and 24 Volt versions.

This allows the use of self-exciting alternators and lets the engine briefly warm up prior to placing the load of a heavily discharged auxiliary battery on the alternator. Unlike diode isolators, this system provides an engine driven alternator with the opportunity to begin charging the main battery before connecting the auxiliary battery.

Intellitec battery isolator relay software#

The software has been designed to be very user friendly, the amount of parameters that can be programmed is almost endless.Intellitec’s Battery Isolator Relay Delay/E offers a low cost, reliable approach to charging multiple batteries. This allows the use of self-exciting alternators and. Unlike diode isolators, this system provides an engine driven alternator with main battery before connecting the auxiliary battery. Intellitec’s Battery Isolator Relay Delay offers a low cost, reliable approach to charging multiple batteries.

Intellitec battery isolator relay Pc#

The GUI software is windows based and is supplied by Intellitec after the installation engineer has been on a certified training course.Ĭommunication from PC to the Battery Guard ECU is via RS232. Intellitec Isolator Relay Delay 00-00629-120. This allows the OEM / fleet operator to provide different levels and frequency of alarms to suit each specific application.īattery Guard 3000+ is also an intelligent split charge system, simply by adding a holding relay to the system, the rest is a simple matter of programming the system to operate to the customer spec.Īs the system is fully programmable, we can ensure that the system can be integrated into the vehicles electrical system and not cause any conflict or warranty issues on ECU’s.īuilt into the software is some limited logging capabilities, we record every low voltage event, this information can be useful for fleet engineers. 12 volts accuated continous duty,rncontacts rated 100 amps continuous, 200 amps surge. There is also 2 programmable 10A outputs that can be used to switch external alarms or indeed what ever the electrical engineer or fleet engineer may specify. Intellitec 100 Amp Battery Isolator Relay 77-90000-110 Intellitec 100 Amp Battery Isolator Relay Isolator Relay Single pole, normally open. The Isolator Relay Delay senses the voltage on the main. Automatic reconnection of power is also possible in specific applications via software.īuilt into the electronics is a programmable audible alarm, this can be linked to both voltage and time. Intellitec’s Battery Isolator Relay Delay/E offers a low cost, reliable approach to charging multiple batteries. Press the reset switch and power for starting is restored. That could be the control wire from the intellitec isolator relay delay. When the battery is isolated due to low voltage, this is recorded in the Battery Guard ECU, this information is useful to fleet operators. Last time this happened, someone had triggered the battery isolator but today. Intellitec 00-00894-700 Power Management System Control Board Wiring And Service For Sale Online.

It provides a method of charging the coach battery from the. The Intellitec 'Big Boy' battery isolator relay is humming and hot long after I switch off the battery disconnects on the coach after being connected to shore electrical outlet. If the battery voltage drops below a pre-determined programmed level of both time & voltage, the system isolates all the electrical loads that are wired through the Intellitec contactor, to guarantee starting power. Intellitecs Bi-Directional Isolator Relay Delay-Diesel 2TM performs two important functions. NO MORE FLAT BATTERIES WITH BATTERY GUARD 3000!īattery Guard 3000+ operates by constantly monitoring the available battery power when the engine or charging source is not running.